Calacatta marble is mostly white and prone to stains if not properly cared for. Some of the things that may stain your Calacatta marble are fruit or vegetable juices, coffee, tea or red wine. Some cleaning products—particularly those that contain dyes—may also be a problem. When it comes to choosing a natural stone for your kitchen, countertops often get all of the glory. However, your kitchen backsplash can be a focal point to show off your design choices.

Be very proactive about your marble countertop investment and take preventative cautions to avoid any issues in the future. I also recommend sealing at least once per year regardless of the outcome of the water drop test. Unfortunately, there isn’t much that can be done at this point. Sealing your marble countertop is extremely important and required to avoid costly mistakes. That’s why it’s particularly important to avoid sealers with acidic ingredients like citrus solvent.

How Does Granite Sealer Work?

Protecting Marble– Marble flooring should be dust mopped daily to remove sand and dirt that can scratch the surface. Care should be taken if using a vacuum since fine grit caught on the wheels can scratch the marble. Using doormats, runners and area rugs in high traffic areas is recommended to prevent abrasion from shoes. receives a small commission when certain items are purchased, but the price is the same for you. If it is not dry before it is sealed, it will not properly cure or protect. If you wipe up a spill and it has already created a stain, remove the stain right then and there.

  • Etch marks are dull spots from acidic or chemical corrosion.
  • But remember the statement quoted above, “it makes sense to seal marble”.
  • TuffSkin Surface Protection solves the marble etching and staining challenges in the stone industry and the commercial and residential markets.
  • So, the colour, durability, strength and insulation properties of the stone remain uninjured.
  • The sealer’s deep penetration into the pores of your material will provide superior water and oil repellency.
  • Waterborne Dense Stone Sealer deeply penetrates into the pores which creates an excellent water and oil repelling barrier.
  • Some cleaning products—particularly those that contain dyes—may also be a problem.
  • Marble countertops are not flexible and too much weight applied in one area can cause it to crack.
  • There are a few professional-grade sealants for natural stone that don’t need to be reapplied.
  • Blot up spills with a paper towel, and avoid wiping to prevent spreading the spill.

It’s safe for use with food and you can use it on your exterior and interior marble. It has a low-odor formula when compared to some of the other sealers on the market, and it’s great for concrete, grout, and stone. It still allows the stone to breathe, which is one of the best parts about this sealer.


These sealers are typically made with silicone, silane, and siloxane and will repel coffees, teas, etc. They can alter the appearance of your stone by adding color or a glossy sheen. It’s not ideal for honed marble because typically you want to achieve a duller sheen.

A honed marble countertop or other surface will not be as reflective as one that is polished. Marble is a fairly porous natural stone material that readily absorbs moisture, which means that it can be stained quite easily. But protecting marble against moisture intrusion, as well as against stains, is relatively easy if you seal it when you install it as well as every year or so after that. The frequency of sealing will depend on how much traffic a marble floor gets. While each sealer on our list has different warranty expectations, the general rule of thumb is to annually apply sealer to marble objects, floors, and counters. We suggest you check a small area with water to see if it beads up to determine when to apply new sealant to your stone surfaces.

Spray the surface, and wipe clean with a soft natural fiber cloth. The application of this paste wax will add shine, and protection, to the stone. When you are looking for a product that you can quickly use to coat your marble objects, then a spray application is acceptable. For a first time sealing, we suggest choosing a product that penetrates deep within the material to form a tough structural bond. It might be the best marble sealer for you if you are interested in the maximum protection of your surfaces. The manufacturer claims that it can protect a surface for up to 5 years and that its non-acidic formula can cover up to 800 square feet.

Over time, some liquids cause staining and damage to the marble. Sealers work by stopping these liquids from soaking into the marble. They definitely provide a substantial amount of protection, making it less likely for stains, dusts, and debris to sink into the marble and become permanent. You get a pad with a holder and dual layered fibers to apply the sealer properly.

Alkaline Cleaner

Some color enhancing products can leave a darker surface after applying the sealer, so we suggest using the testing method prior to applying any sealer for the first time. Whether you are coating a marble statue or an entire floor, the Spruce says you may want to use a pH neutral cleaner on your surfaces before adding sealers. Sealers adhere much better and evenly to a surface free of dust and dirt. Never use a vinegar solution for marble or stone items because the acid will etch the material and cause visible damage. When applying this product, you will want to keep the surface wet for up to 15 minutes during the first application.

These sprays also come in aerosol cans, allowing fast coverage. If your marble counters have discolorations left behind by food or other household items, you’ll need to treat them before moving on to polishing. Elite marble care Polishing Treatment gives marble or stone the sheen you want, enhance the veining in marble and to protect the marble or stone from everyday traffic and spills. Marble is a non-foliated metamorphic rock made up of recrystallized carbonate minerals, many frequently calcite or dolomite. Marble was as soon as limestone, compressed by heat and pressure that re-crystallized into marble when mineral modifications happened. Sealing marble is extremely suggested as stain elimination can be restricted due to its chemical level of sensitivity.

Marble Penetrating Sealer

If you have stubborn coffee stains, you can remove them by soaking a white terrycloth towel or cotton balls with bleach and letting them sit overnight, then rinsing with water. Oil stains can be removed with a baking soda and acetone paste, which you also need to let sit for 24 hours and rinse with water. All stone needs to be sealed with a penetrating sealer, which leaves no coating on the surface of the stone. While the stone is trying to reject liquids that can leave a stain, these sealers give you more time to wipe up a spill. Always require a small test of the proposed sealer on your stone.

Marble is a stone that has long been admired for its beauty. It has been used to build everything from countertops to famous statues. Since it is a very porous natural stone, marble must be re-sealed once every few months. However, you must also make sure to exercise proper amounts of caution regarding any spills. If you properly take care of your marble countertops, which in part can be done by re-sealing appropriately, the surfaces will retain their elegant looks for years. Another traditional method to restore the gleam of marble countertops is to polish them with baking soda.

Protect them from stains and damage with these top granite sealers. Still, the beauty of marble—and the value it adds to your kitchen or bathroom—makes it worth a bit of extra trouble. When your marble surfaces have lost their shine, the following procedures will bring back the glory of this classic stone.

Top Awards for Cleaning Products – The 2019 Good Housekeeping Cleaning Awards –

Top Awards for Cleaning Products – The 2019 Good Housekeeping Cleaning Awards.

Posted: Mon, 15 Apr 2019 07:00:00 GMT [source]

These gaps may be invisible to the naked eye, but if they are not sealed properly, they will most certainly make the marble prone to damage and wear. A sealer for marble is not meant to create a flat layer on the surface with gaps underneath. Most natural surfaces like stone or marble are porous enough that they can be damaged by oils, water, etc. The sealer can be used on both interior and exterior marble surfaces since it protects so well against weather damage. It can also make the marble less slippery, so it’s perfect to seal floors with.

Most specialty marble sealers spray or pour directly onto the marble’s surface. Spread the sealer across the entire marble countertop with a clean, dry cloth and let the sealer soak into the marble for the length of time specified on the product’s container . Sealers with a water base might be easier to clean up after applying.

There are two types of penetrating sealers, solvent based and water based. Solvent based are more durable because they penetrate deeper into the stone. Water based only penetrates as deep as the stone will absorb. Having used marble in our white kitchen before the cream kitchen renovation here in St. Louis, we weighed the options and my love for the soft, natural stone.

Q How Long Do You Have To Wait To Use Countertops After Sealing Granite?

In case the damage is more severe or if you are not sure what method to use and don’t want to risk harming your gorgeous marble, you’d better call the experts. Professional marble cleaners have specific equipment and the required know-how. They will know what type of marble your countertop is and how to deal with it properly. Their skillful approach and adequate materials will restore any marble piece to its original splendor. Specialists will put the finishing touches to their work by applying a quality sealing coat. By the look of your newly-polished countertops, you will be more than happy that you have decided to invest in hiring professionals.

I remember how it was frustrating for customers to figure out how to seal their countertops properly or which products to use for that. Some customers didn’t even understand why to seal countertops but I think it’s pretty obvious, right? Today the situation hasn’t changed drastically, people best marble sealer still need help. This is why I created this blog and I hope it will help you. I worked there for 9 years but now I spend my time playing with my grandchildren and working on this blog. The sealer not only makes your marble resistant but also protects the surface from water spots.

If you’re looking to restore shine to your polished marble counter or tabletop, though, you can do so with these accessible supplies and steps. If you have a marble surface, such as a marble countertop, that is in a high-traffic area, honed marble may be more appealing to you. Because it has a matte finish, it will be able to hide any imperfections such as scratches and etches better than polished marble can.

TRUDY CHUOKE: Cleaning differs for cultured, natural stone marble –

TRUDY CHUOKE: Cleaning differs for cultured, natural stone marble.

Posted: Mon, 10 Sep 2018 07:00:00 GMT [source]


Leave a comment

Your email address will not be published. Required fields are marked *